PILOTCOL – SH (SYNTHETIC RESIN ADHESIVE) : |
PILOTCOL-SH is a Synthetic Resin Adhesive in the form of a milky white viscous paste and is ready to use. PILOTCOL-SH gives such strong bond that if two wooden pieces are joined with PILOTCOL-SH and a hammer is hit heavily, the wood will give way but not the PILOTCOL bond. |
FEATURES : |
- Unsurpassed bonding strength.
- Resistant to water and heat.
- Economical in long run
- Gives higher coverage.
|
USES : |
For bonding wood, plywood, laminates, veneers, particle board/ hard board, MDF to each other. |
- Pencil mfg., sports goods, paper labeling, paper tube, wall paper, carpet Manufacturing.
- Also recommended for bonding any two material where at least one of them is porous e.g. paper, card board, particle board etc.
|
HOW TO APPLY : |
- Clean both the surfaces to be bonded.
- Apply a thin coat of PILOTCOL SH on both or one surface (as per requirement).
- Press the two surfaces together and keep under pressure till the adhesive dries completely.
|
Excess adhesive pressed outside the joints should be wiped out with a wet cloth. |
PACKING : |
In Plastics containers of 250gms, 500gms, 1Kg, 2Kg, 5Kg, 10Kg, 27kg and 54kg. |
Analysis Report/Specification : |
Sl. No. |
Name of the Test |
Results |
1 |
Physical Appearance |
White viscous liquid |
2 |
Film |
Slight hazy |
3 |
PH value |
4 - 6 |
4 |
Viscosity |
300 ± 50 PS ( Brookfield Viscometer) |
5 |
Solid Contents |
43 ± 1 % (w/w) |
6 |
Bond Strength |
Minimum 250 kg |
|